D-Series offers the assurance of the highest quality audio power amp technology with future proofing via the inclusion of simple to use digital audio networking.
A rear panel switch allows the amplifier to accept either four channels of analogue audio or pick up four channels of networked audio, via Dante·, which is then converted using 24 bit 96kHz DACs.
Within this 1U chassis, the amplifier also features individual 70/100V line drive·, an auto standby power mode, tuneable fans adaptable to different level/performance scenarios, and GPIO for remote control and monitoring. The amplifier also supports the back-up amplifier inputs as on the D-40, and has a PFC enabled universal mains supply for worldwide use.
Then, connect to a D-series DSP amplifier using a single CAT5 cable to realise a stereo 4 way system – no external processing required.
Run bridged channel pairs or link adjacent inputs for total flexibility in either analogue or digital mode.
Key Features
Product Details
SPECIFICATIONS
Number of Channels
Output Power: (per channel)*
8 Ohms
4 Ohms
2.7 Ohms
50 ohms (100/70V line)
Output Power: (bridged)
8 Ohms
4 Ohms
THD%: (@1dB below max output)
@ 1kHz
20Hz to 20kHz
Gain / Sensitivity
Gain
Sensitivity (for max power)
Spacer Text
4
Spacer Text
175 W
350 W
480 W
200 W
Spacer Text
700 W
600 W
Spacer Text
< 0.01%
< 0.03%
Spacer Text
26 dB
8.3 dBu
Frequency Response:
(+ 0/- 0.3dB)
Power Consumption: (< 5W in standby)
Nominal @ 240v into 4 ohms
Nominal @ 120v into 4 ohms
Dimensions: (1U) (mm)
Amplifier
Single Box (UK shipping)
Double Box (outside UK)
Weight:
Amplifier
Boxed (shipping weight)
Spacer Text
20 Hz to 20 kHz
Spacer Text
0.74 A
1.53 A
Spacer Text
44(h) x 482(w) x 428(d)
100 x 580 x 590
140 x 610 x 600
Spacer Text
5.1 kg
5.9 kg
*for 100V line drive specifications, visit downloads above and read the 100V line system file.
